Marine Foam Cannon Soap - Ceramic Coating Wash - Clean, Enhance & Protect

The Ultimate Ceramic Coating Wash!

Our Marine Foam Cannon Soap is meticulously crafted to serve as the perfect companion for the care and maintenance of our nano ceramic coated surfaces on yachts and boats.

Purpose:

Tailored for the meticulous preparation and upkeep of
ceramic-coated surfaces, our soap delivers a gentle yet potent cleansing experience. Its pH-neutral formula ensures thorough cleaning without compromising the integrity of your ceramic coatings, leaving behind a flawless finish free from residue and streaks.

Key Features and Benefits:

Ceramic Coating Preservation: Designed to safeguard the quality of your ceramic coatings, our soap ensures optimal adhesion and long-term performance.

Extreme Foaming Properties: With its exceptional foaming capabilities, our soap generates a rich lather that effectively removes salt, minerals, and contaminants from the surface.

Powerful pH-Neutral Formula: Gentle on surfaces yet potent in cleaning, our pH-neutral formula ensures thorough cleansing without causing
harm.

Removes Salt & Minerals: Specifically formulated to
tackle salt and mineral deposits, our soap minimizes effort while maximizing results.

Residue & Streak-Free: Enjoy a pristine finish every
time, as our soap leaves surfaces free from unsightly residues and streaks.

Environmentally Safe: Committed to environmental
responsibility, our soap meets EPA standards and is safe for marine life, ensuring a clean conscience with every wash.

Elevate your boat maintenance routine with Marine Ceramics - Marine Foam Cannon Soap, the ultimate solution for preserving the beauty and longevity of your ceramic-coated surfaces.

Preparation:

• Fill the foam cannon reservoir or a 5 gallon wash bucket with water. The recommended foam soap ratio is 2-4 ounces of soap per 32 ounces for the foam cannons, or 5 gallons of water for buckets.
• Adjust the soap-to-water ratio according to your preference or the level of cleaning required. It's advisable to start with a lower soap concentration and increase if needed.

Dilution:   

Measure and add the recommended amount of "Marine Foam Cannon Soap" to the water-filled reservoir or bucket.

Mixing:     

Gently mix or swirl the solution to ensure the soap is thoroughly distributed and dissolved in the water. Avoid creating excessive foam while mixing.

Washing:

1st Wash (large contaminant removal)

• Attach the foam cannon to the pressure washer or garden hose (depending on which foam cannon you have.)
• Adjust the foam cannon settings to control the soap-to-water ratio and foam thickness based on your preference.
• Apply the soap solution evenly onto the boat's surface using the foam cannon, covering the entire area to be cleaned.
• Allow the foam to dwell on the surface for about 5 minutes to effectively loosen and lift dirt, grime, and contaminants.
• Thoroughly rinse with fresh water.

2nd Wash  (surface detailing)

• Once the boat has been completely rinsed off, you will then apply a second coat of foam to the entire boat (or a section for larger yachts.)
• Using a soft microfiber mitt, or wash pad,  gently scrub and clean the boat’s surface.
• Work section by section, ensuring thorough cleaning without allowing the soap to dry on the surface.

Rinsing:

• Rinse off the soap solution completely using a pressure washer or a hose with a gentle spray nozzle attachment.
• Ensure thorough rinsing to remove all soap residue, especially in crevices and hard-to-reach areas.

Drying:

• Dry the boat surface using a clean, soft microfiber towel, forced air device, or soft chamois to prevent water spots and damage to your ceramic coated surfaces.

Note:   Always perform a spot test in an inconspicuous area to check compatibility before using the product extensively.

Adjust the soap-to-water ratio and application method based on the level of dirt and the specific needs of your boat or yacht.